新闻资讯

Company announcement

Industry information

Sanitary ware resin use common problems and solutions

Sanitary ware resin use common problems and solutions

Cylinder problem, formation reason: acrylic plate is too thin. After the formation of the diamond horn thin, can not withstand the resin curing temperature, resulting in the plate becomes soft wrinkle, burn out. Solution: Increase the thickness of acrylic plate or first in the thin diamond corner position on a layer of resin to thicken, play the role of protective layer, this layer of resin curing (still in the sticky state) and then paste on the surface of glass steel.

13

2023

/

03

Craft production common problems and solutions

Craft production common problems and solutions

Water lines, sticky hands, forming reasons: poor mold texture, mold is not dry enough. Solution: Use good silicone mold and keep the mold clean and dry.

13

2023

/

03

SMC common problems and solutions

SMC common problems and solutions

Sticky film formation reason: mold surface finish is not good solution: increase the mold finish reason: material shrinkage rate is too large or too small solution: improve the shrinkage performance of the material

12

2021

/

11

Soft resin use common problems and solutions

Soft resin use common problems and solutions

Product too strong or too brittle cause: curing too fast solution: reduce the proportion of curing agent, accelerator

09

2021

/

11

Build standards and specifications suitable for China's IT service operation with SPS as the core

Build standards and specifications suitable for China's IT service operation with SPS as the core

Snowflakes are white and sticky. Cause: the humidity of the stickers is too high. Solution: Because pasting paper is made of white latex, and the water content of white latex is high, so after the sticker, the resin coating can be carried out after a long time.

30

2023

/

03

< 12 >